Product Features:

Ready for action right out of the box!! This is the perfect Nanny-Cam, camrera for R/C Helicopter, car, airplane, walking robot, dog, cat, mice, and all kind of pets, security camera, and general project camera.

Operation Instructions:

1. Twist the receiver antenna into the receiver.
2. Connect the receiver to the monitor with AV cable.
3. Plug the DC 12V 500mA adaptor into the power jack of the receiver.
4. Insert the 9V batter or the 9V 500mA Adaptor into the power jack of the camera.
5. Adjust the frequency controller on the receiver to the required position.
6. Change your TV or output device to AV mode.

Specifications:

Camera Shot	1/3 Picture sensors
	1/4 Picture sensors
System	PAL/CCIR
	NTSC/EIA
Effective Element	PAL: 628 x 582
	NTSC: 510 x 492
Picture Area	PAL: 5.78 x 4.19mm
	NTSC: 4.69 x 3.45mm
Definition	380 Lines
Scanning Frequency	PAL/CCIR: 50Hz
	NTSC/EIA: 60Hz
Minimum Illumination	3LUX
Output Frequency	900MHz to 1200MHz
Power Supply	+6 volt DC to +12 volt DC
Power Consumption	50mW
	200mW

*Limited to orders within continental U.S.only. - Shipping charges will be waived when we process your order.

• One Wireless Color Pinhole Camera w/ Microphone
• One Wireless 900MHz - 1.2GHz Wireless Receiver
• 2 DC Adaptors (9V for Wireless Camera, 12V for Receiver use.)
• One 9V Batter Clip (for camera)
• One RCA Video/Audio Cable

 

For More Info on RC Helicoptor ->