The DVDO® iScan™ VP30 is the next generation high-resolution video processor and A/V switcher that sets a new standard for up, down, and cross-converting all of your video sources. Whether it's your 480i cable feed, 480p DVD player, or 720p or 1080i HD set-top-box signal-the iScan VP30 scales your video output to perfectly match the optimum resolution of your display, up to 1080p! Plus, it's HDCP compliant over each of the 4 digital HDMI inputs, and accepts any legacy 480i/480p analog sources.

Serving as your complete A/V hub, the iScan VP30 provides simultaneous audio/video switching with "any rez in - any rez out" video conversion and one clean wire to your display. Add the iScan VP30 to your home theater today and prepare to be visually Captivated!

* ABT's Precision Video Scaling II technology: 10-bit Scaling, Non-linear Scaling, Enhanced Sharpness Control

* Motion and source adaptive video deinterlacing for NTSC (3:2 and 2:2 pulldown; video) and PAL/SECAM (2:2 pulldown; video) sources

* User defined output resolution from 480p to 1080p

* Analog HD Transcoding and Processing

* Flexible Input and Output Aspect Ratio Control

* Display Profiles – For multiple display configurations (4)

* ABT's RightRate™ High-Performance Framerate Conversion

* ABT's AutoVFR™ - Intelligent Component Video Inputs with Automatic Video Format Routing

* AutoVFR™ - Intelligent Component video inputs with Automatic Video Format Routing

* Advanced Source Transition Management provides seamless transitions between source types

* ABT's AutoCUE-C™ - Automatic Chroma Upsampling Error detection & correction

* 10-bit, 300 MHz instrumentation-quality DACs, with up to 10x oversampling and 2X oversampling for 1080p

* Full-frame Timebase Correction

* High performance, multi-standard video decoders (10-bit: 480i/576i; 12-bit: 480p/576p/720p/1080i)

* High-quality super-adaptive comb filter with 2D Y/C separation

* Flexible Digital and Analog Audio switching and routing – four digital audio inputs and one analog audio input with two digital audio outputs (both active)

* ABT's Precision AV LipSync™ intelligent digital audio delay technology to match Audio & Video timing

Specifications:

Inputs:
Twelve Video Inputs Available
--> Two Composite (NTSC/PAL/SECAM)
--> Two S-Video (NTSC/PAL/SECAM)
--> Two Component (YPbPr or RGB/S) processes 480i/p, 576i/p, 720p, 1080i
--> One RGBHV/Component (BNC-style connectors) processes 480i/p, 576i/p, 720p, 1080i
--> Four HDMI processes 480i/p, 576i/p, 720p, 1080i
--> One SD-SDI (Serial Digital Interface) Optional
Nine Audio Inputs
--> Four HDMI
--> Two Coaxial Digital
--> Two Optical Digital
--> One Analog Pair (L/R)

Outputs:
One Analog Video Output
--> Using High Quality BNC-style connectors
--> Configurable for YPbPr, RGBHV, RGB/S, or RGB
One Digital Audio/Video Output
--> Using HDMI (High Definition Multimedia Interface) connector
--> Configurable for YPbPr or RGB
--> Also carries digital audio
Two Digital Audio Outputs
--> One Coaxial Digital
--> One Optical Digital

Controls:
-Infrared remote control with direct access codes or manual controls on front panel
-Functions accessible via either On Screen Display (OSD) or front-panel LED display
-RS-232 port for software downloads and automation
-Fully programmable controls for each separate video input with non-volatile memories:
--> Automatic input source detection & input priority selection
--> Input aspect ratio select: 4:3 fullframe, 4:3 letterbox, 16:9 fullframe or custom input aspect ratio
--> Output aspect ratio select: 4:3, 16:9 or custom output aspect ratio
--> Flexible horizontal and vertical Zooming and Panning controls
-->Picture controls with memory for each input: Brightness, Contrast, Saturation, Hue, Y/C Delay, Sharpness
Output Controls:
--> Analog/Digital, Format/Resolution, Aspect Ratio, Sync Type, Colorspace (RGB or YPbPr), Frame Lock, Display Profiles (4)
27 Built-in test patterns for ease of set up

Miscellaneous
Power
--> Universal AC mains input: 100 - 240 VAC @ 50 - 60 Hz
--> Consumption < 30W
--> Sleep mode - automatic 30 second timeout indicated by power LED color change
Physical Dimensions
--> 10.4”x17”x2.2” (26.3cmx43.4cmx5.5cm) with feet
--> 10.4”x17”x1.8” (26.3cmx43.4cmx4.6cm) without feet
--> Standard 19” 1U 1.75” Rackmount Kit Available (P/N 17-0307-05)
Weight
--> Shipping – 10.5 lb (4.8 kg)
--> Unit without Power Supply – 6.4 lb (2.9 kg)